Ordinary Cleaning - Scotsman LEGACY Use And Maintenance

Table of Contents

Advertisement

CLEANING AND MAINTENANCE OF THE APPLIANCE

Ordinary cleaning

Before carrying out any ordinary or
extraordinary maintenance, it is
necessary to disconnect the appliance from
the power supply, close the water supply tap
and wear appropriate personal protective
equipment (e.g. gloves, etc ...).
Ordinary cleaning is intended to keep the appliance in
good operating condition and prevent the proliferation of
bacteria.
To clean any component or accessory DO NOT use:
• abrasive or powder detergents;
• aggressive or corrosive detergents (e.g. hydrochloric
or sulphuric acid, caustic soda, etc,). Caution! Never
use these substances also when cleaning the floor
under the appliance;
• abrasive or sharp tools (e.g. abrasive sponges,
scrapers, steel brushes, etc.);
• steamed or pressurised water jets.
The user must carry out only routine maintenance,
for any extraordinary maintenance, contact a Service
Centre requesting service from an authorised
technician.
The manufacturer's
disinfectant is the
only one tested
and guaranteed to
thoroughly sanitize all
surfaces in contact
with the ice, in full
compliance with
the construction
materials.
Contact the official
local Manufacturer/
Distributor for any
purchase.
F07
14
The cleaning of the appliance is reserved only for
suitable and capable personnel and must not be carried
out by children.
DAILY
Clean the ice scoop with the manufacturer's
disinfectant mixed with warm water (1 ml in 1 litre of
water, the dilution percentages are also indicated on
the rear label of the product). Finish rinsing and drying it
thoroughly.
MONTHLY
Clean the ice collection compartment with a soft
cloth soaked with the manufacturer's disinfectant mixed
with warm water (1 ml in 1 litre of water, the dilution
percentages are also indicated on the rear label of the
product). Finish with a thorough rinsing.
Clean the external surfaces with a soft cloth
moistened with a specific product for delicate surfaces,
free from acid, aggressive or abrasive agents.
For how to use it, refer to the instructions provided by
the manufacturer of the chosen detergent.
INOX
D
+
1 ml
+
D
F08
H
O
2
1 l

Advertisement

Table of Contents
loading

Table of Contents