Using The Appliance - Scotsman LEGACY Use And Maintenance

USING THE APPLIANCE

This appliance can be used by children aged 8 and over and by people with reduced physical, sensory or mental
abilities or with a lack of experience and knowledge only if they have been adequately instructed and supervised in
the safe use of the appliance and have learned the possible dangers derived from its use.
Turning on and starting the machine
F05
Power the machine by inserting its plug into a socket with adequate capacity and turning ON the switch that
1
powers the socket or, if the machine has been connected to an electrical panel, position the main switch of the
panel to ON: the machine is now powered up.
2
Open the water supply tap so that it can be loaded onto the machine.
The appliance starts loading water automatically. After about 5 minutes loading is complete and ice cube
3
production starts.
ON
Indication on the display of
appliance in operation
12
1
ON
After about 20-30 minutes the first cubes will be released which can then
F06
be removed from the container using the scoop provided. Subsequently,
at intervals of about 20-30 minutes other ice cubes will be released continuously,
without needing to press any button.
To avoid overfilling the built-in container and possible leakage of ice cubes, inside
the container there is a sensor that stops production if the maximum capacity level
is exceeded.
When the cubes are removed and the level is lowered, the machine automatically
resumes production without the user needing to intervene at all.
After removing the ice, the stainless steel scoop is placed inside the collection
container; to avoid contamination of the ice, use only the scoop provided and
sanitize it frequently.
2
OPEN
F05
3
water loading (about
5 minutes)
start of the ice cube
production cycle