Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Installation must be performed by
authorized technicians.
When installing the machine, replace the
existing water supply tubes with the new
ones supplied with the appliance
Place the water drain hose(s) supplied in
the relative drain.
Attention, use only drinking water.
The
water supply tap must be within
reach of the operator.
The installation of a softener filter for the
water connection is recommended.
For the installation, contact your local official
distributor.
Before installation and periodically
during use, check that the power cable is
not torn or damaged.
If the power cable is damaged, have it
replaced ONLY by QUALIFIED
PERSONNEL in order to prevent any risks.
It is mandatory to connect the appliance
to a wall switch installed on the power
line.
Do not place multiple sockets or portable
sockets behind the application.
The main switch and/or the electrical
outlet must be close to the appliance
and within reach of the operator.
During the installation, check that:
- the socket of the power supply line is
earthed.
- the contact opening distance allows
complete disconnection in the conditions
of category III overvoltage. Disconnection
devices must be incorporated into the
power supply in compliance with the
installation rules.
- the appliance has a minimum distance of
150 mm from the walls to allow sufficient
ventilation;
- the appliance is perfectly level.
Installation in accordance with 3500.1 and
3500.2
6
REFRIGERANT GAS SAFETY WARNINGS
Propane is a highly flammable gas.
The appliance contains fluorinated greenhouse
gases governed by the Kyoto protocol, in the
quantities indicated on the serial plate.
The GWP (Global Warming Potential) of R290 gas is
3. The propane used in refrigeration systems is
odourless and heavier than air; in case of
refrigerant leaks it migrates to the ground.
The system is hermetically sealed.
SAFETY WARNINGS FOR UV LAMPS
This natural sanitation system based on the UV lamp is
integrated inside the machine and guarantees absolute
purity and hygiene:
• treats the air with ozone technology in the food area
of the ice maker;
• keeps the ice maker and the container clean, reduces
mould, viruses and other microorganisms;
• it is fully automated and chemical free.
This machine contains an apparatus that
emits UV and generates O₃ dissolved in
the air. In some circumstances and if not
properly managed, O₃ can generate risks to
human health. The XSafe appliance is
designed to produce O₃ below the legal limits
when properly installed, used and
maintained.
Improper use of the device or damage to
the container can lead to the release of
dangerous UV radiation. UV radiation can,
even in small doses, cause damage to the
eyes and skin. Appliances which are
obviously damaged must not be used.
This system requires an annual
maintenance program to maintain its
effectiveness.
The replacement of the UV lamp
CANNOT be carried out by the user,
contact a specialized technician.
Please contact your local distributor or
Dealer for an annual maintenance plan.
Advertisement
Table of Contents
