Safety Warnings - Carima IMD Manual

INTRODUCTION

SAFETY WARNINGS

This information is intended to protect your safety and prevent property damage.
Please be aware of the precautions before using, to prevent serious injuries and printer damage.
When printing, put the printer in a well-ventilated place because resin may smell.
Setting up a printer in a place with a lot of moisture or temperature changes can cause deformation
and malfunction of the product.
If the printer power cable and USB cable are damaged due to being pulled or stepped on the rough
surface, please note that sparking or voltage malfunction may occur.
In addition, there is a risk of fire due to overheating when the power is turned off.
Do not turn the power switch off, located on the back of the printer, when the printer is on.
A forced shut down shortens the life of the printer engine and can cause mechanical failure.
Use the 'Power Off' or the 'Auto Shut Down' button to turn the printer off.
When moving the printer, be sure to completely shut down the printer, and then remove the vat and
build plate so that the resin in the vat does not overflow or leak.
If metal fragments and other types of liquid leaks into the printer, it may cause mechanical
malfunction. Also, operating the printer with wet hands may cause electric shock. Use protective
equipment while using the printer.
* Latex rubber gloves can also be used in place of the nitrile gloves provided.
Do not use volatile objects near the printer as they may cause fire or explosion.
There are potential risks to the printer in terms of chemical composition and voltage.
To prevent injury on children and pets, please install the printer in a safe place.
The warranty benefits of the printer will be forfeited if disassembled or modified artificially.
Carima will not be held liable for the loss caused by this.
For inquiries regarding "After Sale Service" and product warranty, please contact Carima.
IMD AGENCY MANUAL
sales@carima.com
02-3663-8877
03
www.carima.com