Technical Data; Intended Use; Before Starting The Equipment - EINHELL GE-HC 18 Li T Operating Instructions Manual

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.

3. Intended use

Pole chain saw with telescopic handle
The chain saw attachment is allowed to be used
only on the supplied motor head.
The chain saw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_GE_HC_18_Li_T_Part1_USA_SPK7.indb 12 Anl_GE_HC_18_Li_T_Part1_USA_SPK7.indb 12
EN

4. Technical data

Motor power supply: ............................ 18V
Bar chain length: .................................. 8" (20 cm)
Chain pitch: ...................... 3/8" (9.5 mm), 33 teeth
Chain thickness: ......................... 0.050" (1.3 mm)
Saw chain: ...............................Oregon 91P033X
Bar: .................................. Oregon 080NDEA041
Cutting speed
at rated RPM: .................. 12.34 ft./sec. (3.76 m/s)
Telescopic shaft: .... 6 ft. to 9 ft. (1.83 m to 2.77 m)
Oil tank capacity: ...................... 125 ml (4.23 fl oz)
Adjustable
head angles: ...........-60°,-40°,-20°,0°,20°,40°,60°
Adjustable handle angles: ........... -40°,-20°,0°,20°
Weight (Tool only): ........................... 8.8 lbs (4 kg)
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.

5. Before starting the equipment

Caution! Install the battery only after you have
completely assembled the device and made all
settings. Always wear protective gloves when
working on the equipment to protect yourself
against injury. Carefully unpack all parts and
check that they are complete (Fig. 1).
5.1 General information on assembly
a) Fig. 2-3: Push the tube (6) onto the handle
housing (18) as far as the mark and screw it
tight with the assembly nut (5).
b) Fig. 4: Hook the carabiner (19) of the shoulder
strap (7) into the strap attachment (20).
c) Fig. 5: The additional handle (8) consists of
the hex. screw (21) and lock (22). It is fi tted
to the handle locking latch (23) as illustrated.
Push the hex. screw (21) into the additional
handle and screw it tight to the lock (22).
- 12 -
23.11.2022 14:22:53 23.11.2022 14:22:53