Layout And Items Supplied - EINHELL GE-HC 18 Li T Operating Instructions Manual

can result in serious personal injury.
This equipment is not intended to be used
by persons (including children) with reduced
physical, sensory or mental capacities or those
with a lack of experience and/or knowledge
unless they are supervised by a person who is
responsible for their safety or they have received
instructions from such a person in how to use
the equipment safely. Children must always be
supervised in order to ensure that they do not
play with the equipment.
SAVE THESE INSTRUCTIONS
Explanation of the symbols on the equipment
(Fig. 29):
1. Warning!
2. Wear safety goggles, a face guard and ear
protection.
3. Protect the equipment from rain and humidity.
4. Maximum cutting length of the pole chain
saw.
5. Electric shock can cause fatal injury. Keep a
distance of at least 33 ft. (10 m) from power
lines.
6. Read the directions for use before operating
the equipment.
7. Wear sturdy, non-slip footwear.
8. Watch out for falling parts.
9. Keep your distance.
10. Direction of the chain movement and teeth of
the pole chain saw.
11. Wear safety gloves.

2. Layout and items supplied

2.1 Layout
1. Grip
2. On/Off switch
3. Safety lock-off
4. Safety lock-off for the handle angle adjuster
5. Assembly nut
6. Tube
7. Shoulder strap with safety release
8. Additional handle
9. Telescopic tube 1 lock nut
10. Telescopic tube 1
11. Telescopic tube 2 lock nut
12. Telescopic tube 2 with motor housing
13. Safety lock-off for the motor housing angle
adjuster
14. Chain saw attachment
Anl_GE_HC_18_Li_T_Part1_USA_SPK7.indb 11 Anl_GE_HC_18_Li_T_Part1_USA_SPK7.indb 11
EN
15. Chain saw bar
16. Saw chain
17. Chain saw guard
18. Handle housing
19. Carabiner
20. Strap attachment with metal loops
21. Hex. screw
22. Lock
23. Handle locking latch
24. Safety lock-off
25. Motor housing
26. Lock button
27. Chain tension lock knob
28. Sprocket wheel
29. Chain tensioning wheel
30. Oil tank
31. Oil tank cap
32. Pushlock button
33. Battery capacity indicator
34. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Complete handle
•
Complete tube with motor unit
•
Shoulder strap with safety release
•
Chain saw attachment
•
Bar
•
Saw chain
•
Chain saw guard
•
Original operating instruction with safety
information
- 11 -
23.11.2022 14:22:53 23.11.2022 14:22:53