Westinghouse wGenTent User Manual page 7

ASSEMBLY
Set Rod Adjustment Pin (Fig. 1.2)
e. Measure the length and width of your generator frame. Measure only the
outside edge of the vertical frame post to vertical frame post. DO NOT
include the measurement of wheels or handles.
f. Use the Easy Adjustment Guide to reference the appropriate clamp
setting for your GenTent (page 8).
g. Match the measured length and width of your generator to the Easy
Adjustment Guide to determine the pin set number. Adjust the telescop-
ing rod to the appropriate hole and install the molded ring pin to secure.
(Fig. 1.2)
FIG. 1.2
0 1
2
GENTENT
CLAMP SETTINGS
3
English
4
|
7