Supermicro X11 User Manual page 26

Super Secure Erase for the X11/X12/X13/B11/B12/B13/H11/H12/BH12/H13 Motherboards User's Guide
After configuring your setting, press <F4> to save the setting and reboot the system for the
changes you've made to take effect. When prompted for confirmation, select <Yes> and
press <Enter> to confirm your settings as shown below.
The system will first boot into Security Erase mode. After the Security Erase process is
complete, the system will continue to boot. Press <Del> to enter the BIOS Setup utility to
configure BIOS settings as needed.
WARNING!! Be sure to keep your password (and PSID, if any) in a safe and secure place.
When a device is locked caused by an invalid password, it will remain locked, making
the BIOS Setup utility unavailable for configuration until the correct password is entered!
26