4-25) Comp Cooling Fan - Samsung RF18A Series Service Manual

DISASSEMBLY AND REASSEMBLY

4-25) Comp Cooling Fan

Part Name
1. Remove 5 screws from the compressor cover.
2. Disengage the housing connector.
(Refer to the picture)
3. Remove a screw which combine Fan and TRAY
Motor
DRAIN-WATER.
pan
4. Cutting the SEAL-SUPPORT MOTOR.
5. Pull the Fan and disassemble from TRAY
DRAIN-WATER. And then, tilt Fan and pull it
out.
This document cannot be used without Samsung's authorization.
How To Do
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.
56
Descriptive Picture