Samsung RF18A Series Service Manual page 45

DISASSEMBLY AND REASSEMBLY
Part Name
[Assembly]
6. Screw a screw and assemble the Case motor
[Assembly]
7. Attach a SEAL in half
COVER
EVAP-REF
[Assembly]
8. Assemble the Sensor Temp Housing.
[Assembly]
9. Screw two screws. And assemble the hook by
pulling it from the lower part and pushing the
cover down. (Refer to the picture)
This document cannot be used without Samsung's authorization.
How To Do
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.
45
Descriptive Picture
CASE MOTOR