4-24) Sensor In Freezer - Samsung RF18A Series Service Manual

DISASSEMBLY AND REASSEMBLY

4-24) Sensor In Freezer

Part Name
[Disassembly]
1. Separate Cover Sensor on Liner by using Flat
Head Driver.
[Disassembly]
2. Pull out Cover and Wire Harness.
[Disassembly]
3. Disconnect Connector.
Sensor In
Freezer
[Disassembly]
4. Pull out Sensor from Cover.
[Assembly]
1. Put sensor in Cover.
This document cannot be used without Samsung's authorization.
How To Do
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.
54
Descriptive Picture