Yamaha PSR-I300 Owner's Manual page 56

The Functions
Function
Function Name
Number
Pedal (pages 20, 22)
031 Pedal Function
Metronome (page 16)
Time Signature
032
Numerator
Time Signature
033
Denominator
Metronome
034
Volume
Lesson (page 36)
035 Lesson Track (R)
036 Lesson Track (L)
037 Your Tempo
038 Guide
MIDI
039 Local Control
040 External Clock
041 Initial Send
Audio (pages 50, 51, 52)
[AUX IN] Audio
042
Volume
[USB TO HOST]
043
Audio Volume
56
PSR-I300 Owner's Manual
Display Range/Settings
1 (Sustain)
2 (ArpHold)
PdlFunc 3 (Sus+ArpH)
4 (Articulation)
5 (Sostenuto)
TimeSigN 00–60
Half note, Quarter
TimeSigD
note, Eighth note,
Sixteenth note
MetroVol 000–127
R-Part
01–16
L-Part
01–16
YourTemp ON/OFF
Guide
ON/OFF
Local ON/OFF
ExtClock
ON/OFF
InitSend YES/NO
AuxInVol
000–127
USBInVol 000–127
Default
Value
Sustain: Sustain will be applied to the Main Voice and Dual Voice
while the pedal is held down.
ArpHold: Arpeggio playback will continue while the pedal is held
down.
Sus + ArpH: Sustain will be produced and Arpeggio playback will
continue while the pedal is held down.
Articulation: Articulation effect will be produced while the pedal is
1 (Sustain)
held down.
Sostenuto: When Split is turned on, Sostenuto will be applied to
the Split Voice while the pedal is held down. When Split is
turned off, Sostenuto will be applied to the Main Voice and
Dual Voice while the pedal is held down. When Duo mode
is turned on, Sostenuto will be applied to the Main Voice
and Duo L Voice while the pedal is held down.
** Determines the time signature of the Metronome.
** Determines the length of each metronome beat.
100 Determines the volume of the Metronome.
Determines the guide track number for your right hand lesson.
The setting is only effective for Songs in SMF format 0 transferred
from a computer.
Select a Song you want to use for the lessons, select the "R-Part,"
01
and then use the number buttons [0]–[9], or [+/YES] and [-/NO]
buttons to select the channel you want to play back as the speci-
fied right-hand part. We recommend that you select channel 1 for
the right-hand part.
Determines the guide track number for your left hand lesson. The
setting is only effective for Songs in SMF format 0 transferred
from a computer.
Select a Song you want to use for the lessons, select the "L-Part,"
02
and then use the number buttons [0]–[9], or [+/YES] and [-/NO]
buttons to select the channel you want to play back as the speci-
fied left-hand part. We recommend that you select channel 2 for
the left part.
This parameter is for Lesson 3 "Waiting." When this is set to ON,
playback tempo will change to match your playing speed. When
ON
this is set to OFF, playback tempo will remain constant regardless
of your playing speed.
Determines whether the Guide note sounds (ON) or not (OFF)
ON
during the "Waiting" lesson.
Determines whether the instrument's keyboard controls the inter-
nal tone generator (ON) or not (OFF). When you are recording
ON
your keyboard performance to application software on the com-
puter via MIDI, set this parameter to OFF.
Determines whether the instrument synchronizes to the internal
clock (OFF) or an external clock (ON). When you are recording
OFF
your keyboard performance to application software on the com-
puter via MIDI, set this parameter to ON.
Allows you to send the data of the panel settings to a computer.
Press [+/YES] to send, or press [-/NO] to cancel. This operation
–
should be done immediately after starting the recording operation
on the computer.
Determines the volume of audio playback, input from the [AUX
50
IN] jack (page 50).
Determines the volume of audio playback, input from the [USB
100
TO HOST] terminal (page 52).
Description