Advertisement
CAUTION: Do not bypass or eliminate thermal cutout from the circuit.
CAUTION: Check tightness of all electrical connections and wire nuts.
CAUTION: Grounding connection is required.
Thermal cutout
Heating element
Right Side Power Connection
!
NOTE: When control accessories are installed, use wiring diagram supplied with the accessory. Following are examples of wiring diagrams with thermostat.
Single Pole Thermostat
L1
L2 or N
Ground
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2015 Dimplex North America Limited
Wiring Instructions
FACTORY WIRING
L1
Line
L2 or N
Ground
For right hand side connection use same logic.
L1
Line
L2 or N
Ground
For Left hand side connection use same logic.
Wire nut connection
Ground
Nameplate
Left Side Power Connection
Double Pole Thermostat
Load/
L1
L2/N
Ground
Advertisement
