Advertisement
WIRING MULTIPLE LINEAR CONVECTORS TOGETHER
Linear Convectors can be wired in together in parallel to be controlled
by a single thermostat. When units are wired in together ensure that
ground continuity is maintained between the units.
Operation
1. This baseboard must be properly installed before it is used.
2. Prior to energization remove all construction dirt (plaster, sawdust,
etc.) from interior and exterior of linear convector baseboard.
Dimplex linear convector baseboards are designed and tested for
safe and trouble-free operation. All Dimplex linear convector base-
boards are protected against overheating by a built-in thermal cutout.
tor to cycle the linear convector baseboard "ON and OFF". A cycling
CAUTION: Avoid direct contact of paper, fabric, or furniture with
convector baseboard,
Maintenance
CAUTION: Before removing the front cover for cleaning, make
certain the power has been turned off at the circuit breaker panel,
to prevent electric shock.
CAUTION: To avoid burns, allow adequate time for the element
and body casing to cool before attempting to work on the linear
convector baseboard.
The LCM series contain no moving parts. Since the appliance con-
tains no moving parts little maintenance is required beyond vacuum
cleaning. It is however essential that the linear convector baseboard
is not operated with an accumulation of dust or dirt on the element,
as this can cause a build up of heat and eventual damage. For this
reason the linear convector baseboard must be inspected regularly,
depending upon conditions and at least at yearly intervals. Once
cleaning is complete replace the front cover and restore power.
!
NOTE: The user can perform cleaning ONLY. All other servicing
2
Warranty
The Manufacturer warrants the convector baseboard and components of the
enclosed product against any defect in material or workmanship for a period
of one year from the date of purchase, with the exception of the elements
which are warranted to be free from defect in material and workmanship for
ten years. In full satisfaction of any claims under this Warranty the Manufactu-
may decide, any parts which in its opinion are defective.
The Manufacturer shall not be responsible for any transportation or shipping
by it. Misuse of this product or repairs by persons other than the Manufactu-
rer's authorized personnel without the Manufacturer's written approval, will
void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether expressed
-
purpose and shall constitute the sole remedy of the Purchaser and the sole
-
liability of the Manufacturer in respect of the sale of the product, whether
in the nature of breach or breach of fundamental term, or of negligence or
otherwise.
The Manufacturer shall not be liable for any special, indirect or consequen-
tial damages or for any damages resulting from removal or replacement of
a convector baseboard subject to warranty claim without the Manufacturer's
authorization.
This Warranty is transferable by the original consumer purchaser of the pro-
duct. Any claims under this Warranty must be submitted in writing to the Ser-
vice Manager, Dimplex North America Ltd., 1367 Industrial Rd., Cambridge,
Ontario N1R 7G8, Canada.
www.dimplex.com
Advertisement
