Page 1
ACXx429-3U-32 ARINC429 32-Channel Module for PXI-Express / cPCI-Express (3U) Hardware Manual V01.00 Rev. A November 2015 ACXx429-32 Hardware Manual...
Page 3
ACXx429-3U-32 ARINC429 32-Channel Module PXI-Express/cPCI-Express(3U) Hardware Manual V01.00 Rev. A November 2015 AIM No: 60-127D6-16-0100-A ACXx429-32 Hardware Manual...
Page 4
Notice: The information that is provided in this document is believed to be accurate. No responsibility is assumed by AIM GmbH for its use. No license or rights are granted by implication in connection therewith. Specifications are subject to change without notice.
Page 5
DOCUMENT HISTORY The following table defines the history of this document. Appendix A provides a more comprehensive list of changes made with each version. Version Cover Date Created by Description V01.00 Rev. A 19.11.2015 S.Thota First Released Version ACXx429-32 Hardware Manual...
Page 6
THIS PAGE INTENTIONALLY LEFT BLANK ACXx429-32 Hardware Manual...
TABLE OF CONTENTS Section Title Page Introduction ......................7 General ............................7 How This Manual is organized ....................8 Applicable Documents......................8 1.3.1 Industry Documents ........................ 8 1.3.2 Product Specific Documents ....................8 Installation....................... 9 Preparation and Precaution for Installation ................9 Installation Instructions ......................
Page 8
LIST OF FIGURES Figure Title Page Figure 2-1: Front Panel view ..................10 Figure 2-2: Status LED view ..................12 Figure 3-1: Block Diagram of ACXx429-3U-32 .............. 13 Figure 4-1: PXI architecture ................... 19 LIST OF TABLES Figure Title Page Table 2.1: Pin assignment ACXx429-32 ................
For programming information please refer to the documents listed in the 'Applicable Documents' section. The ACXx429-3U-32 is a member of AIM’s new family of CompactPCI /PXI (3U) modules for analysis, simulation, monitoring and testing of ARINC429 channels providing 32 channels on a 3U module form factor.
Installation 2 INSTALLATION 2.1 Preparation and Precaution for Installation The ACXx429 features full PCI Plug and Play capability; therefore, there are no jumpers or switches on the board that require modification by the user in order to interface to the PCI bus. It is recommended to use a wrist strap for any installations.
The connection to other devices is done via a SCSI-3 female connector. The Frontpanel have 32 ARINC429 channels, IRIG IN/OUT and Trigger OUT. The ACXx429-3U-32 implementation has the capability to share the I/O- pins. This means each ARINC429 channel can be used as Transmit or Receive channel, but only one operation mode is possible at one time.
Installation 2.4 Front Panel LEDs Five sub-miniature LEDs, located at the front panel, indicate the module status. The LEDs are located in a quadruple LED-Array on the physical interface daughterboard. Figure 2-2: Status LED view LED Name Colour Description ACTIVITY Green LED flashes if data is transmitted on any channel.
• BIU Processors Section (2-BIU’s) • Physical I/O Interface with 32 ARINC-429 channels and Trigger out • IRIG- Time Code Proc. with free-wheeling function and Sine Wave Output • Boot-Up Flash • PXI Instrumentation Bus Figure 3-1: Block Diagram of ACXx429-3U-32 ACXx429-32 Hardware Manual...
Structure 3.1 PCI-Express bus and BIU-I/O FPGA The new common FPGA architecture of AIM’s PCI family includes a complete PCI- Express bus logic (which is translated to a legacy PCI interface using an external bridge component) and the 2-BIU processors logic. This programmable device implements the following features: •...
(if no special transmission mode is chosen) 3.6 External Trigger Output One Trigger output is provided on ACXx429-3U-32 variant. The Trigger output is TTL level compatible. Filter circuitry is provided at the trigger output to cover Electromagnetic Compatibility (EMC) aspects.
1. Single AIM-Module No External IRIG-B Source No connection required 2. Multiple AIM-Modules with No Common Synchronization Requirement No connection required 3. Single or Multiple AIM-Module(s) with External IRIG-B Source Connect external IRIG-B source to IRIG-IN and GND of all modules 4. Multiple AIM-Modules...
of the ACXx429 Structure 3.8 PXI / cPCI - Connector Pin Assignment To be able to connect a PXI card into a PXIe hybrid slot the couple J1+ XJ4 connectors instead of the legacy J2 + J1 pair must be used, as explained in [1] and [2] and their extensions.
Page 20
Instrumentation Bus PXI-Express THIS PAGE INTENTIONALLY LEFT BLANK ACXx429-32 Hardware Manual...
Instrumentation Bus PXI-Express 4 PXI-EXPRESS INSTRUMENTATION BUS The following section will guide the user to a brief overview of the PXI-Express/cPCI- Express environment which is the natural evolution of PXI/cPCI maintaining the same specific features and a back compatibility with this former standard. The ACXx card can be mounted in either a PXIe/cPCIe hybrid slot or a PXI/cPCI peripheral slot.
The ACXx429-3U-32 card can be set to deliver the PXI 10 MHz System Clock to its internal TIME TAG generation circuitry. The IRIG decoder will then work in Free- Wheeling mode but synchronous to the PXI 10 Mhz clock.
The ACXx429-3U-32 card can use the PXI STAR input signal to perform a TTAG reset (clear) to DAY 1. This TTAG reset to DAY 1 will work if the IRIG circuitry is running in Free-Wheeling mode: •...
Page 24
data Technical THIS PAGE INTENTIONALLY LEFT BLANK ACXx429-32 Hardware Manual...
data Technical 5 TECHNICAL DATA PXI / CompactPCI bus: Compatible with PCI Local Bus Spec. (Release 3.3) 3.3V PCI bus - 5V tolerant PXI / CompactPCI Peripheral slot compatibility PXI-Express / CompactPCI-Express Hybrid slot compatibility Memory: Fast Industrial DDR2-RAM 128 MByte memory size 16 bit wide organized shared between BIU-processor and PCI Express bus BIU-Section: (2 BIUs are Present)
Page 26
Lock time < 5s Free-wheeling accuracy after 10 Minutes < 1ppm (assuming input signal accuracy better than 50ppm) Encoder Format AIM Standard (based on IRIG B format) Absolute Accuracy : +/-25ppm (standard Oscillator) Signal Waveform Amplitude modulated sine wave Output Amplitude...
Page 27
data Technical Line Receiver: typ. 50 kΩ Input Impedance A to B: Input Impedance A/B to GND: typ. 25 kΩ Trigger Out: Output with TTL Level; with high speed EMV varistor, High Pulsewidth strobe, 500 ns duration. PXI Trigger Bus / STAR / Clock: All PXI Inputs are TTL Level compatible Active LOW (falling edge) Trigger Input (also Star) and Trigger Outputs Pulse-width multiple of 100ns...
Notes 6 NOTES 6.1 Acronyms Analog to Digital Converter ALBI ASP Local Bus Interface Application Programming Interface Advanced RISC Machine ARINC AERONAUTICAL RADIO, INC Application Support Processor Bus Interface Processor Bus Interface Unit Board Software Package CPCI Compact PCI cPCIe Compact PCI express Digital to Analog Converter DRAM...
Need help?
Do you have a question about the ACXx429-3U-32 and is the answer not in the manual?
Questions and answers