Timer Recording; System) - Philips DVDR3355 User Manual

Recording
Timer recording (VCR Plus+

System)

This is a simple programming system for
DVD recorders. To use it, enter the
PlusCode programming number
associated with your television program.
You can find this number in your TV
listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer schedule list appears.
Timer Schedule
Source RecMode Date
1
2
3
4
5
6
3
Press OK to confirm.
Or, press 4 key to go to the next
available empty slot and press OK.
➜
The VCR Plus+ System menu appears.
VCR Plus+ System
Enter the PlusCode programming
number for the show you wish to
record. Press [RETURN] to return
to timer schedule or [TIMER] to
exit timer.
5
Confirm
4
Use the numeric keypad 0-9 to enter
the PlusCode programming number for
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in '53124'.)
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalize the DVD+R before it can be played on other players, see page 36.
32
001_033_dvdr3355_37A_eng5
(continued)
®
Start End
Cancel
OK
32
G
To clear the VCR PlusCode programming
number, press CLEAR on the remote
control.
G
To cancel the VCR Plus+
use 3 4 keys to select
menu and press OK.
5
To confirm your entry, select
the menu and press OK.
➜
The system will store the timer entry
and return to the timer editor menu.
G
If the channel number of the TV channel
has not been assigned to the PlusCode
number, you will have to manually key in
the channel number that is assigned to
®
the VCR Plus+ code. Follow the
instructions on the TV.
6
Press TIMER to exit the menu.
7
Insert a DVD+R/+RW into the DVD
recorder.
8
Press STANDBY-ON to turn off the
DVD recorder.
➜
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
➜
If you ignore the warning message, the
DVD recorder will start the timer
recording automatically at the designated
time.
➜
The ' ' icon will light up on the
TIMER
display panel if a timer recording is set.
21/3/05, 3:18 PM
®
programming,
in the
CANCEL
in
CONFIRM