Detailed Safety Regulations - Nax Power Products NAX 950V Manual

OPERATION AND EXPLOITATION OF TOOLS EQUIPPED WITH A BATTERY

Before inserting batteries into the tool, make sure that its on / off switch is in the "off" position. Inserting the
batteries into the device when the on / off switch is in the "on" position can cause serious injury.

Use only the charger recommended by the manufacturer. Using a charger to charge other types of batteries may
cause a fire.

Never use batteries other than those recommended by the manufacturer. Use of other batteries may result in
serious injury or fire.

When the device is not in use, remove the battery. The battery should be kept away from metal objects such as
paper clips, coins, nails, screws, etc., which may short-circuit the battery terminals. Shorting the battery terminals
together may cause burns or a fire.

Under extreme conditions, liquid may escape from the battery. You must avoid contact with it. If it accidentally it
comes into contact with liquid - rinse immediately with water. If liquid gets in your eyes, contact your doctor
immediately. Liquids leaking from the battery may cause irritation or burns.

It is forbidden to use chargers and power supplies outside the rooms and in rooms with high humidity such as
bathrooms or basements.
CAUTION! Chargers and power supplies for battery devices are intended for indoor use in a dry environment.
Danger of electric shock and / or damage to the device.
REPAIR

Before carrying out any adjustment, part replacement or storage, the spark plug wire must be removed. Such
preventive safety measures reduce the risk of accidental starting.

Repair should be performed by a qualified person using only original spare parts. This will ensure further safe
operation of the device. It is recommended to have any service performed by an authorized NAX service center.
CAUTION!
Danger of suffocation when children play with the packaging. The packaging, especially the foil bag, should be
stored out of the reach of children.
DETAILED SAFETY REGULATIONS FOR COMBUSTION VACUUM CLEANERS

Observe all safety instructions, operation manual, descriptions and data supplied with the device. Failure to follow
the instructions below may pose a risk of serious injury.

Use a soft, dry cloth to clean the vacuum cleaner. Never use any detergent or alcohol.

Use personal protective equipment: safety glasses or goggles, protective gloves, protective footwear and
protective clothing. Wear ear protectors. Exposure to noise over a long period of time may result in hearing loss.

Regularly clean the equipment's ventilation slots. The engine blower draws dust into the housing, and large
accumulation of metal dust can cause electrical hazards.

You can only use the vacuum cleaner in good technical condition, perform the necessary actions if necessary or
contact the service center. It is recommended to use the services of an authorized NAX service.

Before starting, check if:
– the device is assembled according to the operation manual,
– the cutting tool is in good technical condition; regularly check chain attachment, damage and wear;
– safety devices (e.g. cutting unit cover, housing, handle, engine switch) are in good technical condition and
work properly;

Before adjustment, cleaning, maintenance, switch off the engine.

Do not use the device when other people, especially children or pets, are nearby.

Do not start a damaged vacuum cleaner.

Do not move the device with the engine running.

Turn off the vacuum cleaner when:
– you leave the equipment unattended,
– before adjustment,
– before checking, cleaning or repairing the device,
– after hitting with a foreign object,
– before you clean,
34 EN