Vacuuming - Panasonic MC-SBV01W543 Operating Instructions Manual

Vacuuming

1
To start it up
Press
■ To change the strength
"ON": Normal vacuuming
"HIGH": To vacuum with high suction power
●
T he floor nozzle brush rotates, and the LED light
lights up.
(The rotating cannot be stopped)
(The LED light cannot be turned off)
2
To shut it off
Press
3
Charge the battery after use. （ P.8）
●
Request
Do not use force on the nozzle, and move it lightly and slowly along tatami mats and wood flooring.
Move it back and forth on carpets. Debris can easily be taken up by pulling the nozzle towards yourself.
(When vacuuming soft and easy to scratch floors such as cedar, cypress and vinyl floors, etc. and when floor
waxes and polishing floor detergents are being used on them, the floors might get scratched up.)
●
Note
If the floor nozzle rises up from the floor, the agitator (brush) will stop rotating for safety.
■ The battery status indicator lamp lights up to let you know!
It indicates the remaining battery level while you are vacuuming.
10
(Operation starts
in "ON" mode)
The operating mode changes
each time the button is pressed.
"ON" "HIGH"
●
Note
If the battery runs out during operation, the over-discharge prevention device will
automatically stop the battery.
Lights up (2 lights)
There is enough battery power. You can vacuum.
Lights up (1 light)
The battery power is running low. You can vacuum.
Flashing (1 light)
The battery power is low. Charge it. (P. 8)