Advertisement
WESTFIRE·WF44·WF45·WF46
How to fit smoke exempt stop for Westfire Uniq 44, 45, & 46
To change stove from Standard model to SE ( Smoke exempt model DEFRA) please follow the next tasks:
1.
Lift off top plate & move air control lever to the
2.
Wind down 6mm grub screw until it bottoms out
right (fully open).
4.
This image shows the air control when not
3.
Check slider is limited when sliding it to the left.
limited, if the DEFRA stop is in place it will not move
(see above image)
this far.
5.
Replace top plate
18 of 20
Advertisement
Need help?
Do you have a question about the Uniq 44 and is the answer not in the manual?