Jilong JL007113N User Manual page 3

Pay attention to the fact that no sharp edges are shaped in the plastic foil while folding up the item. In winner, the
pool is not allowed to be placed at a temperature that is below 5 °C, otherwise the plastic film would be damaged.
Caution: Do not use the alkali or acid detergent to clean product! Do not leave product exposed under
sunlight directly because it will shorten the using-life of product.
WARNING: Noncomplince of the maintenance rules may result in serious hazards for health and especially
for the children.
Repair Patch Instructions
(Small pinhole and small puncture leaks can be repaired with the included repair patch)
a) Locate the leak place.
b) Deflate the air.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be litter larger than the leaking area,
put the patch on leaking area and press firmly.
e) You can use it again after 24 hours drying of the repaired position.
If the damage is bigger than 1" (2.5cm), we recommend using a Silicone or rubber based glue for repair.
Please read warning statement on glue prior to use.
Shanghai Jilong Plastic Products Co. Ltd.
No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China
Tel: +86-21-58942200 E-mail:
After Sales Service For EU Countries (Except Germany/Austria/Switzerland):
Jilong Europe Srl unipersonale
Via Vitaliano Brancati, 44-00144 Roma - Italia E-mail:
After Sales Service for North America (Canada, USA, Mexico):
Jilong Plastic Products North America Inc.
105, West 2nd Avenue, Vancouver B.C. V5Y 1B8 Canada E-mail:
info@jilong.com Web:
3
www.jilong.com
service@jilong-europe.com
service@jilong.com