Table of Contents
Advertisement
6. Press and hold the brake pedal.
7.
Using the instrument cluster controls
on the steering wheel, select Settings.
8. Select Neutral Tow.
9. Press and hold the OK button until a
confirmation message appears in the
information display.
Note: If completed successfully, the
information display shows Neutral Tow
Enabled Leave Transmission in Neutral.
This indicates that your vehicle is safe to
tow with all wheels on the ground.
Note: If you do not see a confirmation
message in the instrument cluster display,
you must perform the procedure again from
the beginning.
Note: You may hear noise as the transfer
case shifts into its neutral position. This is
normal.
10.
Release the brake pedal.
11.
Leave the transmission in neutral (N)
and switch your vehicle off by
pressing the push button ignition
switch once without pressing the
brake pedal or turning the key as far
toward the off position.
Note: Vehicles with keys do not turn to the
off position when the transmission is in
neutral (N). You must leave the key in the
ignition when towing. Use the keyless entry
keypad or an extra set of keys to lock and
unlock your vehicle.
Switching Neutral Tow Off
1.
With your vehicle properly secured to
the tow vehicle, press and hold the
brake pedal and start the engine.
2. Switch your vehicle off by pressing the
push button ignition switch once or
turning the key as far towards the off
position and release the brake pedal.
2022 Expedition (TB8) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Towing Your Vehicle
3. Place your vehicle in accessory mode
4. Press and hold the brake pedal.
5. Shift into park (P).
6. Release the brake pedal.
Note: If completed successfully, the
instrument cluster displays 2H and Neutral
Tow Disabled.
Note: You must perform the switching
neutral tow on and switching neutral tow
off procedures again from the beginning if
the indicator light and message do not
display.
Note: You may hear a noise as the transfer
case shifts out of its neutral position. This
is normal.
7.
8. Release the parking brake, start the
9. If the transfer case does not
Resolving the Shift Delayed Drive
Forward Message
1.
2. Start your vehicle.
3. Shift into neutral (N).
4. With the vehicle running, shift into drive
386
by pressing the push button ignition
switch once without pressing the brake
pedal or by turning the ignition key to
the on position.
Apply the parking brake, then
disconnect your vehicle from the tow
vehicle.
engine, and shift into drive (D) to make
sure the transfer case is out of the
neutral tow position.
successfully shift out of its neutral
position, set the parking brake. Have
your vehicle checked as soon as
possible.
Press and hold the brake pedal.
(D) and let the vehicle roll forward up
to 3 ft (1 m).
Advertisement
Table of Contents
Troubleshooting
