Carrier 40MBAB Installation Instructions Manual page 16

40MBAB: Installation Instructions
ELECTRIC AUXILIARY HEAT MODULE
INSTALLATION AND WIRING
1. Remove the upper cover and use professional tools to remove the
upper cover knock-outs.
Fig. 43 — Remove the Upper Cover
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
2. Remove the terminal block and power cord.
3. Loosen the screws.
4. Remove the electric auxiliary heating cover.
Fig. 44 — Remove the Terminal Block and Power Cord
5. Install the electric auxiliary heating component into the chassis shell
along the front of the unit.
NOTE: Insert the front end into the shell assembly hole.
A220792
Top View
Fig. 45 — Install the Electric Auxiliary Heating
16
Component
A220793
A220794