Pentax ISL_CAM User Manual page 8

Windows 95/NT.)
Highlight "PENTAX EI-C90" and click "Set-up (O)..." to
display the Configuration Screen.
both the camera's internal memory as well as on the PC Card,
you will have to first transfer images from one source, then
switch to the other source to transfer the remaining images.
Click OK to complete the setup procedure, then click OK in the
camera selection screen.
Macintosh
After installation, you can find the ISL_CAM utility and
related files in the System Folder. You will also find a
Select the Serial Port to
which the camera is attached
(usually COM1 - COM4.)
Select the Baud Rate for file
transfer speed (usually 115.2
Kbps unless your computer is
not capable of transferring
data at this rate.) Then select
the source of the images
under the Memory heading. If
you have images stored in
-8-
Now, the Camera
Selection screen
is displayed.