Advertisement
Enter the filenames for the images as necessary.
The functions of the remaining buttons in the ISL_CAM Main
Window are explained as follows:
The "Copy To" button (only available when using
ISL_CAM directly) will allow you to transfer images from
your computer to the camera. This function is covered
elsewhere in this manual.
The "Delete" button will delete the selected images from
the camera's memory. Note, this will erase the images
completely from the camera's storage; be careful not to
delete any necessary image.
The "Ext. Function" button will allow you to switch the
source location for the images. If you have images stored in
both the camera's internal memory and in the PC Card's
memory, this button will allow you to transfer your images
from both locations.
The "Cancel" button will deselect any currently selected
images in the ISL_CAM Main Window. To quit the
ISL_CAM utility application, you must choose Quit from
the File menu.
The "Jump" button will return you to the "Specify Image
No." screen (if checkmarked in the "Camera Selection"
screen.)
6. Image Transfer: To Camera
Images can be transferred from the computer to the camera
using the ISL_CAM utility. When ISL_CAM is used directly
(not through another application via the TWAIN driver or plug-
in), the "Copy To" button becomes active, enabling this fea-
ture. You can copy a clipboard image to the camera, or you can
copy an image in the bitmap/BMP format (Windows) or PICT
format (Macintosh) to the camera.
In the ISL_CAM Main Window, click "Copy To."
-14-
Advertisement
