Image Transfer: From Camera - Pentax ISL_CAM User Manual

transferring data at this rate.) Then select the source of the
images under the Target heading. If you have images stored in
both the camera's internal memory as well as on the PC Card,
you will have to first transfer images from one source, then
switch to the other source to transfer the remaining images.
Click OK to complete the setup procedure, then click OK in the
Camera Selection screen.

5. Image Transfer: From Camera

Windows
In Windows, if you are using the ISL_CAM utility directly,
after selecting and setting up the camera, you will need to then
launch "ISL_CAM" (for Windows 3.1) or "ISL_CAM [32 bit]"
(for Windows 95/NT) also in the Pentax directory (Start Menu:
Programs: Pentax.) For image transfer from within a TWAIN
compliant application, clicking OK in the Camera Selection
screen will take you immediately into the image transfer
process.
Note, if you
had check
marked
"Specify
Displaying
Images(S)"
in the
Camera Selection screen, a separate dialogue box will appear
allowing you to choose which starting image you would like to
display in the ISL_CAM Main Window.
If everything is setup properly and the camera is connected to
the A/C adapter, the ISL_CAM Main Window should appear,
and image thumbnails should begin to download. Once all of
the thumbnails have downloaded, you can begin image file
-10-