Table of Contents
Advertisement
Pump Location
Environmental Conditions
See Technical Data, page 19, for recommended ambi-
ent temperature range and environmental conditions.
Clearance
When selecting the location for the pump, keep the fol-
lowing in mind:
•
There must be sufficient space on all sides of the
pump for installation, operator access, repair, and
air circulation. See Dimensions, page 18. See
manual 311593 for maintenance requirements.
•
Ensure that the mounting surface and mounting
hardware are strong enough to support the weight
of the equipment, fluid, hoses, and stress caused
during operation.
•
There must be a pump disable switch within easy
reach of the pump. The Secure Disable switch on
the 120373 Local Control Box Accessory provides
this function. See page 16.
15H884 Floor Stand
Floor Stand 15H884 is available as an accessory. See
406638 for assembly and mounting instructions.
311592B
Connect Fluid Lines
See F
. 4. The fluid manifolds are secured to the
IG
pumps with 1-1/2 in. clamps and sanitary gaskets (CG).
Manifolds can be oriented in either direction. Connect
the fluid line (R) to the manifold (MF) using 2 in. clamps
and sanitary gaskets (SC). Optional fittings are avail-
able. See T
3.
ABLE
Table 3: Fluid Fittings, Clamps, and Sanitary
Gaskets
Part No.
Description
15J423
Converts 2 in. sanitary to 2 in. npt
adapter
15J422
Converts 1-1/2 in. sanitary to 1-1/2 in. npt
adapter
15J639
Converts 2 in. sanitary to 1-1/2 in. sani-
tary reducer adapter
120350
1-1/2 in. Sanitary Clamp
120620
2 in. Sanitary Clamp
120631
2 in. Sanitary Gasket, PTFE
680454
1-1/2 in. Sanitary Gasket, Virgin PTFE
120351
1-1/2 in. Sanitary Gasket, PTFE
encapsulated fluoroelastomer
1
Use 120351 Gaskets at these locations.
R
F
. 4. Fluid Connection (Pump Inlet Shown)
IG
Pump Location
CG
1
MF
SC
ti8744a
11
Advertisement
Table of Contents
