Advertisement
IPv6 Settings
IPv6 is a next-generation IP protocol designed by the Internet Engineering Task Force (IETF)
to replace IPv4. It can solve the problem of the number of network address resources, and
solve the obstacles for various access devices to connect to the internet.
The host disables the service by default, and automatically assigns IPv6 addresses to
devices in the local area network after it is enabled.
To enable the service, go to "Advanced Settings à IPV6 Settings", and enter the correct
IPv6 address prefix provided by the operator.
Device Status
Device Status displays system information, WAN and LAN status, and Wi-Fi status
information. You can check the router status from "Advanced Settings à Router Status".
35
Advertisement
