Advertisement
Remote Control
Remote Control enables remote users to access and manage the router by configuring the
WAN IP and port number.
To use remote control, go to "Advanced Settings à Remote Control".
1.
Turn on Remote Control.
2.
Set External Port.
3.
Click "Save" to save the settings, and please wait 2-3 minutes.
4.
Enter the router's WAN IP in the browser's address bar, followed by a colon (:) and
the port number. For example, if the WAN IP address is 111.111.111.111 and the port
number is set to 80, you can enter http://111.111.111.111:80 to manage the router
remotely.
Notes:
• The default port is 80; if it cannot be connected, change it to another port
number. When your router uses DHCP to access the Internet, the WAN IP may
change every day. Check the latest WAN IP before using it.
• In order to avoid potential danger from the Internet, please close it when not
using remote management.
•
26
Advertisement
