Advertisement
2.
Open you the Wi-Fi settings on your phone and select "Kogan-Mesh WIFI_XXXX"
to connect.
3.
After the connection is successful, please go back to the home page of the APP.
4.
Under, the Current connected router section click "Kogan_Mesh WIFI_XXXX".
Configure Mesh Router:
1.
Log into the The default login password is "admin", and then click "Login".
2.
After logging in, select "Country/Region" and "Time Zone", then "Change
Password" and click "Next" to continue.
Note: Password length cannot exceed 30 characters or be less than 6 characters.
English letters, numbers and some special characters (_ - . / " |) can be included.
3.
Set SSID, encryption mode and password for your wireless network. The default
encryption mode is "WPA2-PSK". If your device supports "WPA3/WPA2-MIX",
select "WPA3/WPA2-MIX". Click "Next" to complete the setup.
Note: SSID length Maximum cannot exceed 31 characters and 10 Chinese
characters, and special characters ( , # ; $ & ( ) * < > \ ` ), line feed, space and
carriage return cannot be included.
Note: WiFi Password length cannot exceed minimum 63 characters or less than 6
characters. English letters, numbers and some special characters (_ - . / " |) can be
included.
12
Advertisement
