Advertisement
ADVANCED SETTINGS
Adding Additional Mesh Devices
This mesh router device supports up to 7 mesh devices (including this router). To add more
mesh devices to build a stronger network in your home, you will need to pair the new device
with your existing network.
Method one:
1.
Place the new mesh device in your desired location and connect it to power.
2.
On the currently connected mesh router, press and hold the PAIR Button for 2
seconds.
3.
Press the PAIR button on new mesh device. The LED is RED.
4.
The pairing process will take approximately 2 minutes. When successful, the LED
will turn BLUE.
5.
If pairing fails repeat this process or pair using "Method two"
Method two:
Go to Advanced Settings à Mesh Network
1.
2.
Enter the 5G MAC/Pair Key (found on the bottom of the device) of the Mesh
device to join the Mesh network.
3.
Click "Mesh Topology" in the upper right corner of this interface to view the Mesh
network connection status map.
20
Advertisement
