Table of Contents
Advertisement
CP-C290X
STEP
REMOVAL
1
Front Speaker
1. Net Frame .............. (A1) x1
2. Duct Panel ............. (A2) x1
3. Screw ..................... (A3) x4
4. Screw ..................... (A4) x4
Notes:
The Surround speakers can be easily disassembled.Therefore
the disassembling method is not discribed.For details refer to
the disassembling drawing in the Parts Guide.
REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3, 13 and 14 of the disassembly method
to remove the CD mechanism.
How to remove the loading motor
(See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the loading
motor.
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
PROCEDURE
FIGURE
9-1
Net Frame
( A3 ) x4
( A1 ) x1
ø4x14mm
( A4 ) x4
ø4x14mm
Duct Panel
( A2 ) x1
Loading / Up
/ Down Motor
Motor
PWB
( B1 ) x2
ø2.6 x6mm
Shaft
( B2 ) x1
– 9 –
CD-C290X
Tweeter
Woofer
Screwdriver
Figure 9-1
( A1 ) x2
ø2.6 x5mm
Figure 9-2
Stop Washer
( B3 ) x1
Pickup
CD Mechanism
Gear
( B4 ) x1
Figure 9-3
Advertisement
Table of Contents
