Table of Contents
Advertisement
Basics
To save energy, unplug the charger when not in use. The charger does not have a power
switch, so you must unplug the charger from the electric socket when not in use to
avoid wasting power. The charger should remain close to the electric socket and easily
accessible while charging.
1
Connect the USB cable to the USB power adaptor.
2
Open the multipurpose jack cover.
3
Plug the USB cable into the device's multipurpose jack.
4
Plug the USB power adaptor into an electric socket.
5
After fully charging, disconnect the charger from the device. Then, unplug the charger
from the electric socket.
Do not remove the battery before removing the charger. This may damage the device.
6
Close the multipurpose jack cover.
Ensure that the multipurpose jack cover is closed tightly.
17
Advertisement
Table of Contents
