Advertisement
Table of Contents
This disassembly instruction is applicable to Mantra Conference and Lounge Chair.
Upper Backrest
(plastic + foam)
Mechanism
(Steel)
Base
(Aluminum)
Casters x5 (Plastic
and Steel)
For material recycling information please refer to the End of Life Recovery Matrix
and List of Recycling Facilities, which is available at www.allseating.com.
Disassembly Instructions
Mantra Chair
Cylinder
(Steel)
1
Document No:
CDM-44
Issue Date:
24-Sep-2020
Revision:
0
Revised Date:
Arms
(Aluminum)
Lower Backrest
(plastic + foam)
Seat and Shroud
(plastic + foam)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allseating Mantra
Summary of Contents for Allseating Mantra
- Page 1 Document No: CDM-44 Disassembly Instructions Issue Date: 24-Sep-2020 Revision: Mantra Chair Revised Date: This disassembly instruction is applicable to Mantra Conference and Lounge Chair. Upper Backrest (plastic + foam) Arms (Aluminum) Mechanism Lower Backrest (Steel) (plastic + foam) Base (Aluminum)
- Page 2 Document No: CDM-44 Disassembly Instructions Issue Date: 24-Sep-2020 Revision: Mantra Chair Revised Date: Tools: Philips Screwdriver, Hammer Skill Set: Good manual dexterity Estimated Time: 9 min. per chair Steps: 1. Base – 2 min. Turn the chair upside down and start hitting the bottom of the cylinder with a hammer or a mallet while pulling the base upwards.
Need help?
Do you have a question about the Mantra and is the answer not in the manual?
Questions and answers