Advertisement
Mechanism
(Steel
)
Caster
(Plastic)
For material recycling information please refer to the End of Life Recovery Matrix
and List of Recycling Facilities, which is available at www.allseating.com.
Disassembly Instructions
MULTITEK
Document: CAM-310
Revision: 01
Date: June 7, 2012
Back
(Plastic)
Arm
(Plastic/Steel
Seat
(Plastic or
Plastic/Plywood/Foam)
Cylinder
(Steel
)
Base
(Plastic)
)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allseating MULTITEK
Summary of Contents for Allseating MULTITEK
- Page 1 Date: June 7, 2012 Back (Plastic) (Plastic/Steel Seat (Plastic or Plastic/Plywood/Foam) Mechanism (Steel Cylinder (Steel Base (Plastic) Caster (Plastic) For material recycling information please refer to the End of Life Recovery Matrix and List of Recycling Facilities, which is available at www.allseating.com.
- Page 2 Document: CAM-310 Disassembly Instructions Revision: 01 MULTITEK Date: June 7, 2012 Tools: #2 #3 Phillips Head, Rubber Mallet or Hammer, Allen Key. Skill Set: Good manual dexterity. Estimated Time: 15min per chair. Steps: 1. Armrest - 2min Turn the chair upside down, so the bottom is visible. Locate the four fasteners locate on the underside of the seat pan and unfasten.
Need help?
Do you have a question about the MULTITEK and is the answer not in the manual?
Questions and answers