Advertisement
Back Frame
(Steel
)
Back
(Mesh or Upholstered)
Cylinder
(Steel
)
Caster
(Plastic)
For material recycling information please refer to the End of Life Recovery Matrix
and List of Recycling Facilities, which is available at www.allseating.com.
Disassembly Instructions
INERTIA
Document: CAM-308
Revision: 01
Date: June 7, 2012
Arm
(Plastic/Steel
Seat
(Foam/Plywood)
Mechanism
(Steel
)
Foot Rest
(Steel
)
Base
(Plastic)
)
Advertisement
Table of Contents
Related Manuals for Allseating INERTIA
Summary of Contents for Allseating INERTIA
- Page 1 (Mesh or Upholstered) (Plastic/Steel Seat (Foam/Plywood) Mechanism (Steel Foot Rest (Steel Cylinder (Steel Base (Plastic) Caster (Plastic) For material recycling information please refer to the End of Life Recovery Matrix and List of Recycling Facilities, which is available at www.allseating.com.
- Page 2 Document: CAM-308 Disassembly Instructions Revision: 01 INERTIA Date: June 7, 2012 Tools: #2 #3 Phillips Head, Rubber Mallet or Hammer, Allen Key, Box Cutter Skill Set: Good manual dexterity. Estimated Time: 16min per chair. Steps: 1. Armrest - 2min Turn the chair upside down, so the bottom is visible. Locate the four fasteners locate on the underside of the seat pan and unfasten.
- Page 3 Document: CAM-308 Disassembly Instructions Revision: 01 INERTIA Date: June 7, 2012 8. Foot Rest - 1min Remove footrest by placing one hand on cylinder and the other on footrest. Rotate the footrest in a direction to loose. Read the instruction on footrest for direction.
Need help?
Do you have a question about the INERTIA and is the answer not in the manual?
Questions and answers