Table of Contents
Advertisement
Bolt-In Place Installation
NOTE: Frames are pre-drilled with 3/8" diameter holes as shown in below. The bolt holes have clearance
holes for 3/8-inch hardware. All mounting hardware is provided by others.
The flange on the frames will set on top of the flooring and the frame will slide into the opening.
1. Mark Drill Hole Locations
a. Set the door into the desired opening area. The hinge side frame should make
connection with the wall, this connection will add the necessary brace for the
frame. Shim as necessary to square and level.
b. Mark where fastener holes are located on the mounting surface.
2. Drill holes in Mounting Surface
a. Remove the floor door and drill 3/8" diameter holes into the mounting surface
at the marked locations.
3. Secure Floor Door to Mounting Surface
a. With two or more people, set the floor door in place and secure to the
mounting surface with bolts (For existing concrete openings, 3/8-inch anchor
bolts are recommended (Figure 1 & 2). For existing wood openings 3/8-inch lag
bolts are recommended) (Figure 3 & 4). Secure Hinge side frame first.
Great Products. Better Partners.
Babcock-Davis is a leader in roof hatches, smoke vents and safety railings for the commercial roofing market. We also
manufacture architectural access and safety-related building products for commercial structures. Babcock-Davis provides
local connections through a broad distribution network to accelerate and simplify the building process for contractors and
building owners, offering hassle-free services including access to technical experts, REVIT tools for BIM, HPDs for LEED v4, 3-
part specifications and AIA-accredited continuing education courses.
courses.
Figure 1
Figure 2
Installation & Operation + Maintenance
FIRE-RATED FLOOR DOORS
Model: BFDF
©2021 Babcock-Davis
Figure 3
Figure 4
7
Rev 07/2021
Advertisement
Table of Contents
