Table of Contents
Advertisement
Pre-Installation:
Please read the complete instructions carefully before beginning any work.
Special care is required when handling and installing floor doors. Please make sure that all
framework and doors are supported during transport and installation to insure against bending
or racking of the floor door.
Please inspect and set aside parts for later installation
o Slam latch keys
o Keeper extensions
o Plug for keyhole
Storage
o Floor doors are shipped with the intent for installation within 30 days.
o If storage is required, ensure the floor doors are stored flat, covered and indoors.
o If stored outside, the floor door frames can expand and contract causing the
protective coating to crack and chip.
o If the units are stored outside and the result is cracked primer, a primer coat must be
reapplied before the unit is cast-in concrete. Scrape and clean the affected surface and
apply Rust-Oleum prior to installation.
Set Up/Unpack
Warning: Floor Door covers are spring loaded. Ensure proper orientation prior to releasing slam
latch. Do not release latch in upside down position.
o Orient the floor door in an upright position as shown. This is the correct position to
handle the floor door.
o Cut plastic tie wrap and remove envelope.
Great Products. Better Partners.
Babcock-Davis is a leader in roof hatches, smoke vents and safety railings for the commercial roofing market. We also
manufacture architectural access and safety-related building products for commercial structures. Babcock-Davis provides
local connections through a broad distribution network to accelerate and simplify the building process for contractors and
building owners, offering hassle-free services including access to technical experts, REVIT tools for BIM, HPDs for LEED v4, 3-
part specifications and AIA-accredited continuing education courses.
courses.
Installation & Operation + Maintenance
FIRE-RATED FLOOR DOORS
Model: BFDF
©2021 Babcock-Davis
3
Rev 07/2021
Advertisement
Table of Contents
