babcockdavis BDT Installation, Operation & Maintenance Manual

Draft Stop Access Door
Model(s): BDT/BDW/BDP
GENERAL DESCRIPTION
GENERAL SAFETY PRECAUTIONS
is solely the responsibility of the user, through its own analysis to select products suitable for their specific application
requirements, ensure they are properly maintained, and limit their use to its intended purpose. Follow proper local,
state and federal regulations for proper installation and operation requirements.
Transportation + Storage
1. Inspect all shipments and materials for missing or damaged components and hardware.
2. Material must be stored in a clean, dry location.
INSTALLATION
Please read the instructions before beginning work.
When correctly installed, the door will close and latch when released from an open position.
Preparation
Wall framing is required:
o Hinge and Latch Side: Doors 24" x 24" and smaller
o All Four Sizes: Doors larger than 24" x 24"
o Wall opening is door size plus 1/4". Example: 12" x 12" door, opening should be 12-1/4" x 12-1/4".
Access Doors are designed and built for years of convenient and
easy access to mechanical areas in commercial buildings.
Improper selection, installation, or use can cause personal injury or property damage. It
Installation, Operation
+ Maintenance Manual
©2020 Babcock-Davis, Inc.
1
Rev 7/2020