Setting The Ae Metering - Pentax Optio WS80 Operating Manual

4
Press the 4 button.
The setting is saved and the [A Rec. Mode] menu reappears.
5
Press the 3 button.
The camera returns to capture status.

Setting the AE Metering

You can set the area of the screen where the brightness is metered to
determine the exposure.
3
Multi-segment
L
metering
Center-weighted
M
metering
Spot AE metering
N
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AE Metering].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the AE Metering setting.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
116
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
Rec. Mode 1/4
Pixel Track SR
Recorded Pixels
10
M
White Balance AWB
Focusing Area
AE Metering
Sensitivity
Cancel
MENU
OK
OK