Pentax Optio WS80 Operating Manual page 99

2
Use the four-way controller (45) to select j and press
the four-way controller (3).
3
Use the four-way controller (45)
to select j or K and press the
4 button.
The camera is ready to take a series of
pictures.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in j and K modes.
• j and K cannot be selected in 9 (Green), b (Auto Picture),
A (Night Scene), C (Movie), V (Underwater Movie), X (Digital Wide),
S (Fireworks), F (Digital Panorama) or N (Frame Composite) mode.
• The interval of j (Continuous Shooting) varies according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.76), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting
MENU Cancel Cancel Cancel OK OK OK OK
3
97