5
Use the four-way controller (23)
to select [MSC].
6
Press the 4 button.
The setting is saved.
7
Press the 3 button.
The camera returns to A mode or Q mode.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.220
Connecting to a Macintosh 1 p.229
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Unless otherwise specified, select MSC when connecting the Optio
WS80 to your computer.
Setting
USB Connection MSC
PTP
Video Out
Brightness Level
Power Saving
5sec.
Auto Power Off
3min.
Reset
MENU
Cancel
2/3
OK
OK
8
219