Pentax Optio WS80 Operating Manual page 103

3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90° counterclockwise and
align your first picture.
When the camera recognizes a person's
face, the Face Recognition function is
activated and the face recognition frame
appears (p.76).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat Steps 4 and 5 to take the second
image.
The stitched first and second image appears on the display (Instant
Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Recognition function is activated (p.76), it works only
when taking the first image.
• The stitched together images are saved with the pixel size of f
(2592×1944).
1
2 2
OK Exit Exit
3
101