Changing The Start-Up Screen - Pentax Optio W60 Operating Manual

How to display the Playback Mode Palette

Changing the Start-up Screen

You can choose an image to be displayed as the start-up screen when
the camera is turned on.
1
Press the Q button.
The camera enters Q mode.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select ^
(Start-up Screen).
4
Press the 4 button.
The image selection screen appears.
5
Use the four-way controller (45)
to choose an image for the start-
up screen.
6
Press the 4 button.
The Start-up Screen setting is saved.
• Once the start-up screen has been set, it will not be deleted even
if the original image is deleted or the SD Memory Card is
formatted.
• Select [Off] to hide the start-up screen.
• You cannot set images taken with
Screen.
Q button
Four-way controller
4 button
Start-up Screen Start-up Screen Start-up Screen
For setting a captured
image as the Start-up
Screen.
MENU Cancel Cancel Cancel
Cancel Cancel Cancel
MENU
(16:9) as the Start-up
7.5
M
2/2 2/2 2/2
OK OK OK OK
100 - 0017 100 - 0017
100 0017
8
OK OK OK OK
209