Pentax Optio W60 Operating Manual page 140

4
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to
set the interval, then press the 4
button.
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Total Time].
6
Set the total time.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hour, then press
the four-way controller (5).
4
3 Use the four-way controller (23) to set the minute, then press
the four-way controller (5).
The frame returns to [Total Time].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hour, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minute, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The Interval movie setting is saved and the camera returns to capture
status.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval movie recording starts.
The camera turns off between shots (during standby). Press the power
switch during standby to display the remaining number of shots and
interval on the display.
138
Interval Shoot
Interval 1min
Total Time 0hr
Start Delay 0hr
MENU
10min
0min