Framing Your Pictures (Frame Composite) - Pentax Optio W60 Operating Manual

Framing Your Pictures (Frame Composite)

In Y (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to select Y (Frame
Composite).
3
Press the 4 button.
A 9-frame display of the frame selection
screen appears.
4
Use the four-way controller (2345) to choose the
frame you want to use.
5
Press the Zoom/f/y button
towards y.
The selected frame appears in single-image
display. You can choose another frame
using either of the following operations.
• Use the four-way controller (45) to
choose a different frame.
• Press the Zoom/f/y button towards f to return to 9-frame display of
the selection screen, and then perform Step 4 to choose a different
frame.
If no buttons are operated in single-image display, the displayed
frame is selected. Repeat from Step 1 to select another frame.
Shutter release button
Zoom/f/y button
3 button
Four-way controller
4 button
y
OK
f
OK
4
OK OK OK
OK OK OK
71