Pentax Optio W60 Operating Manual page 226

Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The
built-in memory is not
enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from
built-in memory
Alarm is set
Messages such as the following may appear on the display when using
the PictBridge function.
Message
Low paper level in the
printer
No paper in the printer
9
Paper stuck in the printer
Low ink level in the printer
No ink in the printer
Printer error
Data error
Connection error
Check printer
Printing now
224
This message appears when you try to switch to Q mode
while an image is still being recorded, when a file is being
saved, or when the protect setting or DPOF setting is being
changed. It disappears after the image is recorded or the
setting is changed.
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card is being formatted.
Displayed when there is insufficient space available on the
built-in memory to save a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed when no SD card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters built-in memory mode.
This message appears when the alarm is set and before the
camera automatically turns off.
The paper level of the printer is low.
There is no paper in the printer.
The paper is stuck in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
Displayed when a PictBridge connection fails.
Displayed when printing is being executed.
Description
Description