Installing Software On The Host Computer; Installing The Hardware; Connecting The Usb Cable - National Instruments USB-7856 Getting Started

Figure 1. Kit Contents for the NI USB-7856R
1
4
1. NI USB-7856R Module
2. USB Cable
3. Ferrite Bead
4. NI-RIO Media
5. Power Supply
6. Getting Started Guide

Installing Software on the Host Computer

Before using the NI USB-7856R, you must install the following application software
and device drivers on the host computer.
1. Install the driver software using either the media included in your kit or by
downloading the latest version from ni.com/downloads.
2. Follow the instructions in the installation prompts.
1. Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
3. When the installer completes, a dialog box asks if you want to restart, shut
down, or restart later. Select Restart.

Installing the Hardware

2 3
5 6
USB-7856 Getting Started
© National Instruments
5