Bosch Professional GLM 50-27 CG Original Instructions Manual page 31

You can measure any number of lengths LX, which will be automatically added and multi-
plied by the height H.
The individual measured value displayed in the measured value line (d) is added to the
length L1. The sum of the two lengths (displayed in the middle measured value line (d)) is
multiplied by the saved height H. The total area value is shown in the result line (e) at the
bottom of the display.
Stake-Out Function
In the stake-out function, the reference level is the marking shown in the display.
The reference level is not the edge of the measuring tool.
set
0.500 m
1
set
0.500 m
distance yourself slowly from the starting point.
The measuring tool continuously measures the distance to the starting point. The
defined length and the current measured value are thereby displayed. The lower or up-
per arrow displays the shortest distance to the next or previous marking.
Bosch Power Tools
The stake-out function repeatedly measures
a defined length (distance). These lengths
2x 0.500m
1.000 m
can be transferred to a surface, for example
to enable material to be cut into pieces of
equal length or to install stud walls in a dry-
wall construction. The minimum adjustable
length is 0.1 m and the maximum length is
2
50 m.
3
Press the button to open the Functions menu.
Select stake-out function
with the button.
Use the button or the
length.
Press and hold the
the length by larger increments.
Press the button to start the stake-out function and
English | 31
and confirm the selection
button to set the required
button or the button to change
1 609 92A 8KF | (08.05.2023)