28 | English
Indirect Height Measurement
1
1
Press the
button to open the Functions menu.
Select indirect distance measurement
ton.
Select indirect height measurement
Briefly press the
button to switch on the laser.
Place the measuring tool at the height of the lower measuring point B.
Tilt the measuring tool so that the laser is pointed at the upper measuring point A.
Press the
button to start the measurement.
After the measurement has been completed, the height will be automatically calculated
and displayed in the result line (e). The measured values for section 1 and angle are in
the measured value lines (d).
Double Indirect Height Measurement
1
2
1 609 92A 8KF | (08.05.2023)
With indirect height measurement, you can
determine distance AB by measuring dis-
tance 1. The measuring tool calculates the
A
required height AB from angle and dis-
tance 1.
Correct results are achieved only when the
right angle required for the respective
measurement is exactly adhered to.
B
and confirm the selection with the
and confirm the selection with the
With double indirect height measurement,
you can determine distance AB by measur-
A
ing distances 1 and 2. The measuring tool
calculates the required height AB from
1
angle and distances 1 and 2.
The use of a tripod is recommended for this
measurement.
2
B
but-
button.
Bosch Power Tools