Press the
button to open the Functions menu.
Select indirect distance measurement
ton.
Select double indirect height measurement
button.
Briefly press the
button to switch on the laser.
Tilt the measuring tool so that the laser is pointed at the upper measuring point A.
Press the
button to start the first measurement.
Tilt the measuring tool so that the laser is pointed at the lower measuring point B. Do
not change the position of the measuring tool when doing so.
Press the
button to start the second measurement.
After the measurement has been completed, the height will be automatically calculated
and displayed in the result line (e). The measured values for section 1, section 2 and
angle are in the measured value lines (d).
Indirect Length Measurement
Press the
button to open the Functions menu.
Select indirect distance measurement
ton.
Select indirect length measurement
Put the measuring tool on the starting point A of the required distance AB.
Tilt the measuring tool so that the laser is aligned with the level of end point B.
Press the
button to start the measurement.
Bosch Power Tools
and confirm the selection with the
and confirm the selection with the
and confirm the selection with the
and confirm the selection with the
1 609 92A 8KF | (08.05.2023)
English | 29
but-
but-
button.